High-tech Energy-efficient Guest Rooms with TIS- Energy management in hotels is really a challenging problem for owners. From the desired temperature to their favorite light level, guests are more likely to return for an additional stay when they can customize their room to suit their preferences. However, providing these characteristics using old technology wastes lots of energy. For example, there are a lot of issues with the old card key switches. Guests can put any card in the old switches, or they might ask for more than one card. Even when hotel desk refuses to give more than one card to a guest, she/he may claim to have lost the card.

How to save energy in hotel without using card switch?

The standard old technology of hotel card switch. Additionally there is a great deal of over usage of lights and AC energy as a result of things running even when guests aren’t inside their rooms, which can cause a monetary loss for the owner. Needless to say, no hotel owner desires to prohibit guests from possessing a comfortable stay, nor do owners expect guests to get into a dark or cold hotel. Nobody is to blame. Both guests and hotel owners have the legal right to fulfill their interests.

Some hotel owners think when they separate the AC through the main network, less energy will be consumed, and some believe that motion sensors would be the solution. However, these approaches neglect to resolve the situation. The AC is regarded as the energy-consuming device of all, and motion sensors can be nightmares because they only function based on movement detection, which means that the AC and lights might go off while a guest is sleeping or reading a magazine. Nightmarish!

The TIS Automation Company supplies the best solution for hotel guest rooms by introducing its innovative technology in a smart ceiling sensor: Energy Servant. Our Energy Servant blows past classic hotel card switches with its capability to detect human presence in a room. This ceiling-mounted sensor has several options, such as a PIR motion sensor, a light harvest sensor, 2X digital inputs, infrared emitters appropriate for all split AC types, TV brands infrared codes, temperature sensor, 24X flags, and 32 lines of logic and timers.

TIS Energy servant, the brand new means for hotel economical technology. By installing this door sensor in the entrance to a room, connecting it towards the Energy Servant’s digital input, and programming the logic lines, the problem of room occupancy is entirely resolved.

The following logics may be defined for this particular sensor to handle room energy without the discomfort for guests:

Logic 1: If there is any movement in the room, the occupancy mode will be on.

Logic 2: If the main door is opened and closed, a flag will switch on for one minute to ascertain if there exists movement in room. If no movement is detected after 1 minute, the device will activate energy-saving mode. This really is valuable in situations when a guest enters the room briefly. In energy-saving mode all lighting is off aside from a nightlight, which stays on for three hours just in case there is certainly another guest having a nap. Also, the AC will not be turned off, nonetheless its temperature will be decreased by 2 degrees. It will help save energy over time.

Logic 3: If the energy-saving mode is enabled without any movement is detected for over 3-5 hours, the nightlight and AC will likely be turned off automatically. Additionally it is easy to define lower temperature levels for the AC. Additionally, the Energy Servant can change the AC on/off when it understands that a balcony window/door is open. All this requires is adding a magnetic contact linked to the balcony window/door and programming the required smart decision. The light harvest sensor helps save energy by wscgid balcony lights off if you have enough sun light.

Another practical and beneficial capability of this sensor is its built in thermostat, which will help keep up with the right temperature all the time. This is important to keep furniture fresh and intact. Also, in hot spots and even when the room is empty for a long time, humidity and bad smells will never turn into a problem in the room. This sensor may be designed to alter AC to dry mode in the event the room temperature reaches or exceeds 28-30C degree. This could happen many times throughout the day if required. A comparable performance may be programmed in cold spots to stop mold.

An alternative choice of the smart system is TV control. In the event the hotel offers the guest with a room tablet, she/he will be able to control the room’s TV along with it. This sensor was set up in 20 rooms inside the Fairmount Blue Mountain Hotel in Sydney. The effect was considerably enhanced energy management and lots of satisfactory comments from guests who enjoyed their luxurious remain at this hotel.

TIS offers the chance to meet both hotel owners and guests interests and needs with just a few items and then in the most power efficient possible way. For more information or even to plan a consultation, give us a call at www.tiscontrol.com